M3 /ENM
(with single lever mixer)
M3 /SNM (with dual tap mixer)
Small electric instantaneous water heater with open-outlet
single lever mixer as an economical means of supplying
hot water between approx.
35 °C and 50 °C to a
wash basin. The water is heated directly as it flows through
the heater, thus eliminating all heat losses and ensuring
that hot water is immediately available. The high-grade
mixer is supplied with flexible connecting hoses for straightforward
installation.
Pop-up waste available as an optional extra.
Description
Small instantaneous water heater
with open-outlet single lever mixer for undersink installation
Effective, easy-to-service
bare-element heating system
Immediate supply of hot water without preheating and
without loss of heat
Mains power cable approx. 70 cm long, with standard
plug
Straightforward installation thanks to compact
size and flexible connecting hoses
Use
Single wash basins, e.g. in cloakrooms, sanitary rooms in offices, shops, restaurants
and surgeries
Comparative economy
The small instantaneous water heater M3 stands out through
its compact size and economical operation. The water is
heated directly as it flows through the heater. Hot water
is not stored and energy is not wasted in standby mode
as would otherwise be the case. The comparison clearly
shows the potential savings that can be realized with the
instantaneous water heater, since heat lost by a storage
heater can be greater than the energy required to wash
hands.
Appliance dimensions (cm) H13 X W19 X D7 Type & Capacity:-
M3 / SNM 3.5 kW
, 230 V, 15 A - approx 2 l/min (15-40°C)
M3 / ENM 3.5 kW , 230 V, 15 A - approx 2 l/min (15-40°C)
Product
Information & Technical Manual see our download section.
Small electric instantaneous water heater with mixer as an economical means of supplying hot water between approx. 35 °C and 50 °C to a solitary wash basin. The water is heated directly as it flows through the heater, thus eliminating all heat losses and ensuring that hot water is immediately available. Thanks to the high-grade special mixer, the appliance can easily be connected to a 1/2" water connection.
Description
Small instantaneous water heater with special mixer (open-outlet design) and a 16 cm swivel spout for above-table installation
Effective, easy-to-service bare-element heating system
Immediate supply of hot water without preheating and without loss of heat
Mains power cable approx. 70 cm long (only M3/SMB with standard European plug)
Use
Solitary points of use, such as a wash basin or kitchen sink
Appliance dimensions (cm) H165 X W185 X D80 Type & Capacity:-
M4/SMB, 4.4 kW, 230 V, 19 A - approx 2.6 l/min (15-40°C)
Product
Information & Technical Manual see our download section.
Small electronic instantaneous water heater with highly-efficient bare-wire heating system for economic water supply to e.g. a handwash basin or a sink. The shapely small appliance heats the water automatically as it flows through it, without wasting energy in standby operation. The heating power is electronically controlled in order to ensure that the outlet temperature won't be exceeded (factory setting ca. 38°C). In combination with the economical flow rate the appliance ensures maximum energy efficiency.
Description
Mini-sized electronic instantaneous water heater operates automatically by the flow
Heating power controlled electronically for temperature stabilisation
Outlet temperature can be preset inside the unit between about 30°C and 50°C (factory setting 38°C)
Flow adjustment control, preset for a temperature increase of 25 K
Effective bare-wire heating system IES for very quick response
Double pole thermal cut-out protection
Special jet regulator for use with screw threads M22/M24 included
Connecting set to angle valve included
(T-piece and flexible pressure hose), except for type MDX 6-220
Mains power cable approx. 65 cm long
Inlet/outlet water connection 3/8"
Use
With standard taps for handwash basins and sinks
also if low flow water pressure at installation site
also suitable for reheating water e.g. in connection with solar heating systems
also usable with a pillar mixer (without mixture of hot and cold water)
Electric mini instantaneous water heater with highly-efficient bare-wire heating
system for supplying hot water to a single point of use, i.e. one handwash
basin or sink. The attractive small appliance perfectly matches all wash basins
and heats the water automatically as it flows through it, without wasting energy
in standby operation. The economically set flow rate ensures maximum efficiency.
The heater can easily be installed directly to a standard mixing tap, our special
jet regulators guarantee efficient and economical flow results.
Description
Mini-sized electric instantaneous water heater, operates automatically
by the water flow
Water outlet via existing tap or mixer, CLAGE taps and accessories
recommended
Effective bare-wire heating system for very quick response
Flow adjustment control, preset for a temperature increase of 25 K
No standby heat losses
Double pole thermal cut-out protection
Inlet/outlet water connection 3/8"
Mains power cable approx. 70 cm long
Applications
Handwash basins, e.g. in toilet rooms, bathrooms, bedrooms, restaurants and
office buildings.
Kitchen sinks (only highest power rating recommended, depending on local supply
temperature)
Useful:
Installation is a simple matter with the connection set (T-piece and flexible
pressure hose) optionally available with types
MDE 6, MDH-C
Appliance dimensions (cm) H13 X W19 X D7 Type & Capacity:-
MD6 5.7 kW , 230 V, 25 A - approx 3.3 l/min (15-40°C)
Product Information & Technical Manual see our download section.
Electric water boiler for producing boiling water above the kitchen sink. The appliance is filled with between 0.2 and 5 litres of water, as required, and heats the water to the selected temperature between approx. 37 °C and boiling point at the push of a button. When the water has been heated, the appliance switches off automatically or keeps the water at boiling point if set to stage 3. Hot water is dispensed via the control elements and can be mixed with cold water.
Description
Water boiler for supplying boiling water in quantities from one cup to 5 litres
Temperature range from approx. 37 °C to boiling point (99 °C)
Fitting integrated into the appliance
Overflow integrated into swivel spout
Automatic cutout when boiling point is reached
Plastic housing
Safe installation on the wall
Plug-in
Use
Kitchen sinks, Tea kitchens in offices and industry
Appliance dimensions (cm) H270 X W293 X D169 Type & Capacity:-
K5, 5 l, 2 kW, 230 V - approx 5l, boil time 5l 14.5 mins
Product Information & Technical Manual see our download section.
Electronically controlled instantaneous water heater with
tubular heating system for supplying hot water between
35 °C and 55 °C. The required temperature can be
selected via two touch keys. The heating power is controlled
electronically in order to obtain and roughly maintain
the set temperature. The flow rate can easily be adapted
via the integrated filter valve.
Description
Compact, electronically controlled instantaneous water
heater
Tubular heating system in copper tank
Closed-outlet design with safety temperature limiter
Heating power controlled electronically in accordance
with feed temperature and flow rate
Control panel with LED indicator for setting the temperature
between 35 °C
and 55 °C
Control knob for reducing the flow rate right down to
zero
Variable electrical connections
Variable water connection for surface-mounted or flush-mounted
installation
Moderate flow rate of 7 l/min is required
Use
Singlepoint and multipoint use, e.g. sinks or wash basins
Appliance dimensions (cm) H33 X W21 X D9 Type & Capacity:-
CRX 9 8.8 kW , 230 V, 38 A - approx 5 l/min (20-45°C)
Product Information & Technical Manual see our download section.
Compact electronically controlled instantaneous water heater
with bare-element heating system for supplying hot water
between 35 °C and 55 °C to one
or two points of use. The required hot water temperature can be set via touch
keys. The heating power is controlled electronically in order to obtain and
maintain precisely the set temperature.
For undersink installation we recommend our models CBX 13-U.
Description
Compact electronically-controlled instantaneous water
heater
Two touchkeys and an LED display
for selecting temperatures between 35°C and
55°C
Flow control adjustable down to
zero
Short back panel for easy installation,
a choice of entry points for electrical connections,
and variable water connection pieces for surface or flush-mounted
installation
Use
Shower cabin for economy and convenience (requires
a suitable shower attachment such as the CXH )
Kitchen sinks
Wash Basins
Appliance dimensions (cm) H33 X W21 X D9 Type & Capacity:-
CBX 13 13.5 kW , 400 V, 3 X 20A - approx 2 l/min (35-55°C)
Product Information & Technical Manual see our download
section.
Electric instantaneous water heater, hydraulically controlled with tubular heating system for supplying hot water between approx. 35 °C and 55 °C to one or two points of use. The appliance automatically switches on when the required minimum flow pressure is exceeded and transfers its thermal energy to the water flowing through. The temperature of the hot water can be influenced via the draw-off fitting by increasing or decreasing the flow rate. A thermal cutout protects the appliance against overheating.
Description
Compact, hydraulically controlled instantaneous water heater
Tubular heating element in copper tank
Closed outlet (pressure-type) design with safety temperature limiter and monitor
Integrated shutoff valve with easy-to-service strainer and flow control
Variable electrical connections
Variable water connection for surface-mounted or flush-mounted installation
Use
For export markerts
For solitary wash basins (CRH 3)
For singlepoint or multipoint use at wash basins, sinks
Example of installation for one point of use Under-table installation with optional piping kit UCX (Art. No. 2400-25010) directly connected to the piping of the sanitary fitting.
T-piece, copper piping with dia. 10 mm and service valve to be provided by customer.
Product Information & Technical Manual see our download
section.
Small electric water storage heater with pressure-type internal
tank of corrosion-proof copper for supplying hot water between
approx. 35 °C and 80 °C to one
point of use. The appliance can be installed either as a vented unit in combination
with an open-outlet fitting or as an unvented unit in combination with a corresponding
relief valve. The water in the storage heater is automatically maintained at
the infinitely variable, preset temperature by a controller. High-grade thermal
insulation ensures low energy consumption in standby mode.
Description
Small electric water storage
heater with 10 litres capacity, unvented design
For
under-table (S10-U) or above-table (S10-O) installation
Corrosion-proof internal copper tank with recyclable
CFC-free thermal insulation
Frost protection
3-stage
temperature lock of the selector range
Power
cable approx. 65 cm long, with standard European plug
S10/EKM comes with a vented single lever mixer
Use
Solitary points of use, such as kitchen sinks
Appliance dimensions (cm) H45.2 X W30 X
D28.5 Type & Capacity:-
S10-U - 10 Litre,
2,2 kW
S10/EKM - 10 Litre, 2,2 kW
NOTE: You will require the addition SGU Undersink Safety Kit if you are not using an EKM Vented mixer.
Product Information & Technical Manual see our download
section.
Electronically controlled instantaneous water heater for supplying hot water in a comfortable and economic way. The power consumption is controlled by the electronic in accordance with the ambient temperature and flow rate up to the capacity in order to obtain precisely the set outlet temperature and to keep it constant. The required value can be entered between 20°C and 60°C via touch keys and is shown on the large display indicating also the function and service menu. The maximum power rating (18–27 kW) can be determined when the appliance is installed Description
Fully electronically controlled instantaneous water heater with bare wire heating system IES®
Precise outlet temperatures due to TWIN TEMPERATURE Control TTC® up to the capacity of the appliance
Attractive, very slim design
Electronic safety system with temperature and pressure cutoff
Compatible with solar heating systems
Easy installation with variable connection possibilities
Multiple Power System MPS®: Power rating can be limited to 24 kW, 21 kW or 18 kW when installing the appliance
Optional remote control module available
Use
Singlepoint or multipoint use, e.g. bath, shower, sink or wash basin
Comfortable control panel with touch keys
Control panel with large LCD-display to enter precise outlet temperatures between 20°C and 60°C .
Two programme buttons for individual set values, activation of temperature limit as well as indication of function and service menu.
Appliance dimensions (cm) H46.6 X W23.1 X
D9.7 Type & Capacity:-
DEX - 18 kW..27 kW (26A..39A), 400V, 3P, 2,5 – 8,0 l/min)
Product Information & Technical Manual see our download
section.
The wireless remote control provides comfortable handling of
the electronic instantaneous water heater DSX resp. DEX if the
water heater is not installed in the immediate vicinity of the tap
connection. It can be attached on the wall or positioned loosely
and allows a temperature selection of the instantaneous water
heater over a distance of 30 m inside the building additionally
to the selection on the heater display. Up to four remote control
devices can be run with one instantaneous water heater.
